CE Certification


1. Introduction to CE certification

The 'CE' mark is a safety certification mark that is considered a passport for manufacturers to open and enter the European market. CE represents the logo of the European Unified CE Certification (CONFORMITE EUROPEENNE). All products with the 'CE' mark can be sold in various member states of the European Union without meeting the requirements of each member state, thus achieving free circulation of goods within the EU member states.



In the EU market, the 'CE' mark is a mandatory certification mark. Whether it is a product produced by internal enterprises in the EU or products produced by other countries, in order to circulate freely in the EU market, it is necessary to add the 'CE' mark to indicate that the product meets the basic requirements of the EU's 'New Methods for Technical Coordination and Standardization' directive. This is a mandatory requirement for products under EU law.

2. What are the certification agencies for CE certification? CE certification agency recommendation!

CE certification agency recommends Beide Technology!!!

Beide Technology, also known as Shenzhen Beide Technology Testing Co., Ltd., was established in the Shenzhen Special Zone in July 2006 in accordance with the law. Over the past 15 years, it has been a subsidiary of ZTE, Feike, and Han's Laser,

Thousands of customers such as Lei Shi Lighting and Duo Wei female mobile phones provide one-stop testing and certification services

The company currently has a business area of over 2500 square meters, including over 1000 square meters of technical center laboratories and sample rooms, and over 800 square meters of marketing center business and customer service departments,

The management center's conference room, reception area, reception room, manager's room, and finance room have an area of up to 7

00 square meters;

The company has various talents, and all testing personnel hold certificates to work. They have the qualification for import and export commodity inspection and quarantine, and have rich experience in testing and product evaluation. They can provide

Our customers provide a one-stop global certification solution. The experiment has advanced detection equipment

More than 200 units, all purchased from international brands such as Tektronix, Agilent, and German R/S, have been calibrated by nationally recognized metrology institutions and put into use. The company's testing laboratory is located in

Under the guidance of authoritative certification bodies such as UL in the United States, SIEMIC, and Rheinland in Germany

Established according to the ISO 17025 laboratory management system, we provide customers with fair and satisfactory testing data, and can provide customers with comprehensive and comprehensive one-stop services.

3. Which products require CE certification and the benefits of CE certification

All products exported to the EU market require CE certification, with the difference being that the instructions are different, such as MD for mechanical products and EMC LVD for electronic products,

Wireless products do RED, general products do ROHS, and special products have special requirements and instructions. Therefore, CE certification is required. It is recommended to consult a professional machine

Constructing and entrusting professional tasks to professionals will greatly save your company's CE certification time, energy, and expenses.

The application for CE certification has multiple benefits: 1. The EU's laws, regulations, and coordinated standards are not only numerous, but also very complex in content, thus obtaining the EU certification

Designated institutions to assist is a wise move that saves time, effort, and risk; 2. Maximize access to information from consumers and market surveillance agencies

Letter; 3. Can effectively prevent the occurrence of irresponsible accusations, as each product faces different situations, it is recommended to consult professional institutions to discuss

Get more preferential policies and benefits!

4. How to apply for CE certification? Detailed process introduction

The method and process for applying for CE certification are the same for different products, and the detailed process is as follows:

1. The manufacturer's relevant laboratory (hereinafter referred to as the laboratory) shall submit a preliminary application orally or in writing.

2. The applicant shall fill out the CE marking application form and send the application form, product manual, and technical documents to the laboratory (if necessary, the applicant company shall also be required to provide a prototype).

3. The laboratory shall determine the inspection standards and items, and provide a quotation.

4. The applicant confirms the quotation and sends the samples and relevant technical documents to the laboratory.

5. The applicant shall provide technical documents.

6. The laboratory issues a fee notification to the applicant, and the applicant pays the certification fee according to the fee notification requirements.

7. Conduct product testing and review technical documents in the laboratory.

8. Technical document review includes: whether the document is complete. Is the document written in the official language of the European Community (English, German, or French).

If the technical documents are incomplete or do not use the specified language, the laboratory will notify the applicant for improvement.

If the test fails, the laboratory will promptly notify the applicant and allow them to make improvements to the product. So, until the test passes. Applicants should address the technical aspects of the original application

Make changes to the information to reflect the actual situation after the changes.

5. What materials need to be prepared for CE certification? The details are as follows:

a. Product user manual.

b. Safety design documents (including key structural drawings, which can reflect the climbing distance, gap, number of insulation layers, and thickness of the design drawings).

c. Product technical conditions (or enterprise standards),

d. Product electrical schematic diagram. e. Product circuit diagram. f. List of key components or raw materials (please choose products with European certification marks).

g. A copy of the certification certificate for the entire machine or component. h. Other necessary information.

Special instructions

To shorten the certification cycle, it is best to provide information in electronic document format.

During the certification process, for some special circumstances, the enterprise may need to submit additional relevant information.

6. What is the cost of CE certification? How long does it take?

Cost - Because CE certification belongs to product certification, the corresponding testing requirements, testing costs, and testing cycles for different products also involve completely different standard instructions

The different requirements for issuing a certificate will also affect the cost. So if you want to know the clear CE certification fee, based on the specific products and requirements provided by your company, it is better to comprehensively

Evaluation is the only way to provide a specific quotation!

Cycle - 'It usually takes 15-20 working days to apply for CE certification. For general products, if your company's products are hazardous machinery products, medical devices, etc

It is a product with a relatively complex structure, so the application time will be longer, and the specific needs to be determined by engineers after comprehensive judgment!

7. Acceptance objects and sizes of CE certification marks

The recipient of the CE certification mark is the national regulatory authorities responsible for implementing market product safety control in European Community member states, rather than customers. When a product has already attached the CE certification mark,

The authorities responsible for sales safety supervision in member states should assume that they comply with the main requirements of the directive and can freely circulate in the European Community market.

The free circulation of goods is the cornerstone of establishing a single market, and the mechanism for achieving free circulation of goods is the CE mark, which is established between EU countries to avoid new trade

Barriers, mutual recognition, and coordination of technical standards. The principles are as follows:

The content stipulated in the legal documents for CE certification coordination and unification (i.e. EU directives) is limited to the basic requirements of the product, in order to facilitate the free circulation of the product within the EU;

The EU Harmonized Standards contain the basic requirements of the Directive;

The application of EU harmonized standards and other standards is voluntary, and products can choose to apply EU harmonized standards or other technical specifications to meet the basic requirements of the directive

Requirements; The product's compliance with EU harmonised standards is naturally recognized as meeting the basic requirements of the directive.

The size of the CE mark

The CE mark, product name, trademark, European agent and importer's address must be clearly and legibly pasted or printed on the toy body or other packaging,


If the toy is too small in size or is composed of small parts, relevant information can be printed on the toy packaging or catalog.

The European market has packaging regulations for the size of the CE mark, where the height of the CE character must be at least 5mm, and the total length of the CE character must not exceed 12mm. The width of the CE character should not exceed 12mm,

It should not be less than 1/5. The thickness should be at least 1/5 of the height (at least 20 here × 1/5=4mm) As shown in the figure, the outer radius is 10mm, and the inner horizontal column must have at least 80% of the outer radius (10 × 0.8=8mm)

The figure shows an example of a CE marking with a height of 2 centimeters, which should include warnings and precautions printed in local market text. Name of manufacturer or authorized agent, importer Trademark and address. Compliant CE.



Pre:NoneNext:EU Certifi
Related Recommend
Copyright ©2017 - 2022 Shenzhen Beide Technology Testing Co., Ltd. 1 Yue ICP Preparation No. 09063742-1 犀牛云提供云计算服务