Safety and reliability testing

Safety and reliability testingTest standards:

▷ IEC/EN 60950-1（GB4943.1）	▷ IEC/EN 60065 （GB 8898.1）
▷ UL60950	▷ UL1310
▷ IEC 62040-1	▷ IEC 62040-1-1
▷ IEC 62040-1-2	▷ IEC/EN 61347-1
▷ IEC/EN 61347-2-13	▷ GB20943
▷ AS/NZS 4665.1	▷ No.278/2009
▷ EPRI General Test Guidelines for Energy Efficiency AC-DC and DC-DC Built-in Power Supplies Version 6.4.3 2009	▷ Single output AC-DC and AC-AC
▷ Energy efficiency testing methods for external power sources August 11, 2004	▷ Battery Charging System Energy Star Product Program Requirements
▷ IEC 62384	▷ IEC/EN 60950-1（GB4943.1）
▷ UL60950	▷ IEC 62368
▷ Computer Energy Star Program Requirements	▷ Server Energy Star Project Requirements
▷ Energy Star Telephone Communication Equipment Project Requirements	▷ California Energy Efficiency Battery Charging System Requirements
▷ IEC/EN 60065	▷ IEC 62384
▷ UL 60065	▷ IEEE 1725
▷ IEEE 1625	▷ IEC 62133
▷ GB/T 18287	▷ JIS C8714
▷ JIS C8712	▷ UL 1642
▷ UL 2054	▷ IEC 61960
▷ IEC 60096.4 (GB 8897.4)	▷ IEC 61951-1
▷ IEC 61951-2	▷ UN 38.3
▷ IEC 62281	▷ IEC 60068-2-1
▷ GB/T 2423.1	▷ IEC 60068-2-2
▷ GB/T 2423.2	▷ IEC 60068-2-78
▷ GB/T 2423.3	▷ IEC 60068-2-30
▷ GB/T 2423.4	▷ IEC 60068-2-38 :2009
▷ GB/T 2423.34	▷ IEC 60068-2-6
▷ GB/T 2423.10	▷ IEC 60068-2-64
▷ GB/T 2423.56	▷ ISO 2247
▷ GB/T 4857.7	▷ ISO 8318
▷ GB/T 4857.10	▷ GB/T 4857.20
▷ GB/T 4857.23	▷ IEC 60068-2-31
▷ GB/T 2423.8	▷ IEC 60068-2-13
▷ GB/T2423.21	▷ IEC/EN 60529
▷ GB 4208	▷ IEC/EN 60529
▷ GB 4208	▷ GB/T 5169.10
▷ IEC 60695-2-10	▷ GB/T 5169.16
▷ IEC 60695-11-10	▷ GB/T 5169.5
▷ IEC 60695-11-5

■ Test items

▷ Heating test under normal and abnormal working conditions	▷ Touch Current
▷ 60A grounding resistance test	▷ Withstand voltage and insulation resistance test
▷ Component failure testing	▷ Power source energy efficiency testing
▷ Energy efficiency testing for computers, servers, etc	▷ Standby power consumption test
▷ Charging system energy efficiency testing	▷ Battery extrusion test
▷ Battery needle test	▷ Battery combustion ejection test
▷ Short circuit test inside the battery	▷ Short circuit test outside the battery
▷ Battery weight impact test	▷ Battery height simulation test
▷ Battery cycle life test	▷ Battery forced discharge test
▷ Battery protection board 1mV step over impulse over discharge protection voltage test	▷ Battery protection board over temperature protection during charging and discharging
▷ Battery protection board high current short circuit protection test	▷ -70℃－150℃ High and low temperature storage,
▷ Damp heat alternating cycle	▷ Impact, vibration, and collision
▷ Free fall	▷ Low pressure storage
▷ IPX1-IPX8 waterproof test	▷ IP5X-IP6X dust test
▷ HB level material testing	▷ V-0, V-First-class material combustion level test

Pre:High and lNext:Wireless a

Related Recommend

CE Certification

1. Introduction to CE certificationThe 'CE' mark is a safety certification mark that is considered a passport for manufacturers to open and enter the European market. CE represents the logo of the European Unified CE Certification (CONFORMITE EUROPEENNE). All products with the 'CE' mark can be sold in various member states of the European Union without meeting the requirements of each member state, thus achieving free circulation of goods within the EU member states. 　　 In the EU market, the 'CE' mark is a mandatory certifi...
Electromagnetic Compatibility Directive (EMC)

Summary of Certification ContentElectromagnetic compatibility (EMC) refers to the ability of a device or system to operate in its electromagnetic environment in accordance with requirements without causing unbearable electromagnetic interference to any device in its environment. Therefore, EMC includes two requirements: on the one hand, it refers to the requirement that the electromagnetic interference generated by the equipment to the environment during normal operation cannot exceed a certain limit; On the other hand, it refers to the device having a certain degree of immunity to electromagn...
GS certification

GS Certification Process1. First meeting: Through the first meeting, the testing agency or agency will explain the specific certification procedures and relevant standards to the applicant's product engineer, and provide the required document forms to be submitted.2. Application: The applicant shall submit documents that meet the requirements. For electrical products, it is necessary to submit documents such as the final assembly drawing, electrical schematic diagram, material list, product purpose or installation manual, and explanation of differences between series models.3. Technical me...
PED certification

The EU Pressure Equipment Directive has been updated from 97/23/EC to 2014/68/EU, and the new directive will be enforced from July 19, 2016. The 'Pressure Equipment Directive' (hereinafter referred to as the PED Directive) is one of the many EU directives targeting pressure equipment, which stipulates the basic safety requirements (ESRs) for pressure equipment and maintains the current safety level of pressure equipment in the EU. It is suitable for the design, manufacturing, and qualification evaluation of pressure equipment and complete equipment with a maximum working pressure great...