According to Resolution 92/98, which came into effect in 1998, Argentina implements S-Mark mandatory certification for electronic and electrical equipment with input voltages ranging from 50 to 1000 Vac AC or 50 to 1500 Vdc DC. The resolution divided the products into four groups and implemented them step by step starting from 2001. By August 1, 2004, all products must obtain S-Mark certification to enter the Argentine market. Argentina is a member country of the CB system, and the CB certificate and report are recognized, which can save a lot of trouble in repeated testing and sending samples. The Argentine S-Mark safety certification does not require factory inspections, and the applicant should provide a Spanish nameplate (including safety warning signs) and user manual. The certification agency's logo should be added next to the S-Mark logo.
S-MARK Certification Technical Information
1. The voltage in Argentina is AC220V/50Hz
2. There are two types of plugs, namely grounded Class I and ungrounded Class II
3. The plug of the power cord should be verified by IRAM or TUV Argentina S-Mark
4. There are three different plugs in Argentina:
<250V/10A Class I (IRAM 2073 standard)
<250V/20A Class I (IRAM 2073 standard)
<250V/10A Class II (IRAM 2063 standard)
S-MARK Certification Program
The normalization process is a necessary measure taken to make the product immediately available in the Argentine market.
Here are some ways in which products can be launched through a 'normalization process':
·Install a suitable power cord set
·Convert the power cord group to a qualified power cord group
·Convert the power plug to a qualified Argentine plug
·Additional Argentina S-Mark logo/label
For different imported products, the assembly process can refer to the following operation methods:
1. Products with power sockets
Products that use an additional power cord set can be imported to Argentina at the discretion of the applicant, whether or not the power cord set is attached. If the power cord is not attached, it must be mentioned in the test report. If the power cord group has not been evaluated, it will also be indicated on the certificate. If an additional power cord group is added in Argentina, it is part of the certification process. The Rhine Argentina branch in Germany will adopt a 'normalization procedure' and go to the warehouse where the power plug is replaced for simplified factory inspection.
2. Products with fixed power cord
If the fixed power plug included in the imported product to Argentina is not approved by Argentine safety regulations, the local seller or importer must replace it with a plug approved by an Argentine certification unit. German company Rhine will conduct a simplified factory inspection before issuing the certificate.
3. Products without S-Mark logo or correct product label
The S-Mark logo can be attached to the product upon arrival in Argentina, but before it is launched for sale. German company Rhine will conduct a simplified factory inspection before issuing the certificate.
Argentina S-MARK certified products
1. Electric irons, air conditioners, electric heaters, portable kitchen utensils, electric tools, electric shavers, refrigerators, beauty and hair products, freezers, lampholders and lamp parts, range hoods, and auxiliary lighting equipment
2. Lighting fixtures, lawn mowers and similar appliances, washing machines, dishwashers, kitchen utensils (excluding portable kitchen utensils), microwaves, electric fans, vacuum cleaners, and floor beauty related equipment,
3. All other appliances specified in Article 92/98, such as products that comply with IEC 60950, 60065, 61010, and other specifications.
Argentine S-MARK certification requirements
1. Safety test report:
CB test report with CB certificate from Rhine, Germany, or IEC test report in English from Rhine, Germany with national requirements from Argentina
2. Additional documents
·Application Form
·Importer's Authorization Letter
·Design drawings, specifications, circuit diagrams
·Product photos
·The inscription bears a safety warning in Spanish
·Spanish User Manual
·Factory Inspection Report for Rhein, Germany
·Plug meets Argentine IRAM 2063/2073 standard certificate
S-MARK certified factory inspection
·Conducted annually by Rhein Germany, factory inspections can be incorporated into other safety verifications in Rhein Germany, such as TÜ V Bauart, TÜ V GS Mark et al.